Description

Size: 95 mm X 120 mm ( size conversion 1 cm = 10 mm = 0.4 inches ) Color: Digital Ink-Jet Color Printed on Reflective Vinyl Feature: Attract others' attention AT NIGHT ! Application Tips: Step 1 Clean the surface You don’t want to trap any dirt or other particles under the decal, so it’s very important that you clean the surface. This step will also allow you to create the best adhesion surface you can create to ensure that the decal stays on and doesn’t age improperly. Do not use window cleaner or other ammonia-based cleaners or soaps. Make sure that you give the area time to dry before applying the decal. Step 2 Peel Back Lay the decal face down and slowly peel away the paper. Take your time with this step and carefully check that the decal is staying on the transfer tape. You may need to rub the back of the paper backing over the decal in areas where it seems ‘stuck’. Step 3 Apply the decal Once you’ve removed the backing paper, carefully apply the decal to the prepared surface. Start on one side and using an old credit card or something similar to flatten and apply the decal. You are trying to avoid air bubbles, so this is a very important step. Step 4 Remove transfer tape Carefully remove the transfer tape by peeling it away at a 45-degree angle. Take your time and peel it away slowly, making sure that the decal stays in place and remains adhered to the surface. Bonus step 5 Admire your handiwork Take a moment to step back and revel in how great it feels to have just completed a beautiful installation of the decal. Take a photo of it. Also, don’t forget to leave a good review for the seller about your experience. It’s more important than you think and doesn’t cost you anything. I hope you enjoyed these decal instructions.